|
Who's Online
|
There are currently 3831 online users. [Complete List]
» 5 Member(s) | 3826 Guest(s)
|
|
|
|
Thread Rating:
- 2 Vote(s) - 5 Average
- 1
- 2
- 3
- 4
- 5
|
[Tutorial] Build your own CWM recovery
|
Posts: 1
Threads: 0
Joined: 2013-05-26
Points:
0
Reputation: +1
HI there
I make scatter and then try to save rom-0 but when i press the read back button nothing happen both in turned off and on mode, also when i tried to enter recovery mode the android logo comes with ! sign,
what should i do, please help me
You like this post
Posts: 30
Threads: 4
Joined: 2013-05-03
Points:
10
Reputation: +76
(2013-05-26, 05:42)aramic Wrote: HI there
I make scatter and then try to save rom-0 but when i press the read back button nothing happen both in turned off and on mode, also when i tried to enter recovery mode the android logo comes with ! sign,
what should i do, please help me
Same for me. After selecting Readback I disconnect USB, switch off the phone, extract battery for some seconds, reconnect battery, and reconnect USB. Nothing happens. Sp Flash screen shows "Searching" forever. I wonder how any tool can find a USB device if the device is switched off...
Take care outside, guys
Phone: Bedove X21
Chip: MTK6577
Android 4.1.2
Posts: 10
Threads: 1
Joined: 2013-04-18
Points:
0
Reputation: +7
(2013-05-27, 18:44)rey69 Wrote: (2013-05-26, 05:42)aramic Wrote: HI there
I make scatter and then try to save rom-0 but when i press the read back button nothing happen both in turned off and on mode, also when i tried to enter recovery mode the android logo comes with ! sign,
what should i do, please help me
Same for me. After selecting Readback I disconnect USB, switch off the phone, extract battery for some seconds, reconnect battery, and reconnect USB. Nothing happens. Sp Flash screen shows "Searching" forever. I wonder how any tool can find a USB device if the device is switched off...
try that wit the phne is on. i think that better
You like this post
Posts: 30
Threads: 4
Joined: 2013-05-03
Points:
10
Reputation: +76
(2013-05-27, 21:58)yamado Wrote: (2013-05-27, 18:44)rey69 Wrote: (2013-05-26, 05:42)aramic Wrote: HI there
I make scatter and then try to save rom-0 but when i press the read back button nothing happen both in turned off and on mode, also when i tried to enter recovery mode the android logo comes with ! sign,
what should i do, please help me
Same for me. After selecting Readback I disconnect USB, switch off the phone, extract battery for some seconds, reconnect battery, and reconnect USB. Nothing happens. Sp Flash screen shows "Searching" forever. I wonder how any tool can find a USB device if the device is switched off...
try that wit the phne is on. i think that better
Instructions explain clearly that phone must be off to run this procedure. In any case I have tryied also with it switched on with same result. Thank you anyway.
You like this post
Take care outside, guys
Phone: Bedove X21
Chip: MTK6577
Android 4.1.2
Posts: 30
Threads: 4
Joined: 2013-05-03
Points:
10
Reputation: +76
(2013-05-28, 22:29)rey69 Wrote: (2013-05-27, 21:58)yamado Wrote: (2013-05-27, 18:44)rey69 Wrote: Same for me. After selecting Readback I disconnect USB, switch off the phone, extract battery for some seconds, reconnect battery, and reconnect USB. Nothing happens. Sp Flash screen shows "Searching" forever. I wonder how any tool can find a USB device if the device is switched off...
try that wit the phne is on. i think that better
Instructions explain clearly that phone must be off to run this procedure. In any case I have tryied also with it switched on with same result. Thank you anyway.
 Did it!!
Basically main issue were MTK USB Drivers. I will prepare a tutorial based on my experience and place it here. Thanks to all people sharing in the web.
GizBeat and mrrip like this post
Take care outside, guys
Phone: Bedove X21
Chip: MTK6577
Android 4.1.2
Posts: 3
Threads: 0
Joined: 2013-06-08
Points:
0
Reputation: +6
Hello,,
Phone needs to be off when connected to Sp flashtool so only the Preloader connects, that is what Sp Flashtool looks for. If phone is on when connected preloader will not pop up like it does when phone is off and then you connect. On some MT65xx devices it is necessary to press one of Vol buttons or Menu, or even camera button while connecting. Also, on some models (For example the "Note 2" N7100 MT6577) you also need to also remove battery before connecting or preloader will not connect as it should. If you need help or need me to explain in further detail feel free to ask!
Good luck, hope this helps someone! 
Posts: 48
Threads: 12
Joined: 2013-06-08
Points:
27
Reputation: +60
Just two quick questions:
1. Does this actually create a CWM (one that looks like it came from CWM).
2. Will it be in English?
Thanks.
Posts: 3,182
Threads: 555
Joined: 2013-02-10
Points:
21,230
Reputation: +3636
(2013-06-11, 21:26)MayhemVC Wrote: Just two quick questions:
1. Does this actually create a CWM (one that looks like it came from CWM).
2. Will it be in English?
Thanks.
Yes. This creates a true CWM. It will be in English.
Two roads diverged in a yellow wood,
And sorry I could not travel both
And be one traveler, long I stood
And looked down one as far as I could
To where it bent in the undergrowth
Posts: 48
Threads: 12
Joined: 2013-06-08
Points:
27
Reputation: +60
2013-06-12, 16:08
(This post was last modified: 2013-06-12, 19:52 by MayhemVC.)
(2013-04-21, 00:30)yulypis Wrote: The procedure in short is:
A. Read the ROM
B. Process the ROM and generate the recovery (should be automatic)
C. Flash the generated recovery
In a bit more details:
A. Read the ROM which includes these sub steps:
1. Create a scatter file for your phone with MTKDroidTools and leave MTKDroidTools open
2. Open SP Flash Tools and load the scatter file you just created
I get up to here and I get the following message:
"Error: Initializing scatter file failed. Please check the name of scatter file which you load is legal."
I'm using MTK Droid Root & Tools v2.4.6 and SP Flash Tools 3.1224.01
Any suggestions?
Update: So I've downloaded a scatter file and recovery.img sourced from another HX9299A owner and I got the same error message.
SOLVED (Sort of): This version of flash tools does not support MTK6589 scatter files.
Posts: 30
Threads: 4
Joined: 2013-05-03
Points:
10
Reputation: +76
(2013-06-12, 16:08)MayhemVC Wrote: (2013-04-21, 00:30)yulypis Wrote: The procedure in short is:
A. Read the ROM
B. Process the ROM and generate the recovery (should be automatic)
C. Flash the generated recovery
In a bit more details:
A. Read the ROM which includes these sub steps:
1. Create a scatter file for your phone with MTKDroidTools and leave MTKDroidTools open
2. Open SP Flash Tools and load the scatter file you just created
I get up to here and I get the following message:
"Error: Initializing scatter file failed. Please check the name of scatter file which you load is legal."
I'm using MTK Droid Root & Tools v2.4.6 and SP Flash Tools 3.1224.01
Any suggestions?
Update: So I've downloaded a scatter file and recovery.img sourced from another HX9299A owner and I got the same error message.
SOLVED (Sort of): This version of flash tools does not support MTK6589 scatter files.
Use version 3.1304.0.119 or higher, which support MTK6589.
Take care outside, guys
Phone: Bedove X21
Chip: MTK6577
Android 4.1.2
|
| Possibly Related Threads… |
| Thread |
Author |
Replies |
Views |
Last Post |
| |
[Tutorial] BACKUP, CUSTOM RECOVERY AND ROOT FOR MT67xx SMARTPHONES |
djtetei |
14 |
24,189 |
2020-04-11, 21:53
Last Post: romaneart
|
|
[Tutorial] How to format your NAND Flash MT6589, MT6577, MT6582, MT6572 |
akwangwu |
47 |
285,135 |
2019-03-18, 08:11
Last Post: abrahim
|
| |
[Tutorial] Ultimate no-root backup CWM MT6582 MT6592 MT6589 MT6589T MT6577 MT6595 |
Sniper47 |
39 |
114,761 |
2018-04-17, 05:30
Last Post: lentmain
|
| |
[New flash method] MT6752 how to root & flash recovery MT67xx |
Ninja^F.U.B.A.R. |
10 |
29,926 |
2018-02-15, 06:46
Last Post: milantic
|
| |
fly swift gts porting costum recovery and costum rom |
xcoder |
0 |
1,647 |
2017-10-07, 04:36
Last Post: xcoder
|
Users browsing this thread: 1 Guest(s)
|
|
![[-]](https://www.chinaphonearena.com/forum/images/collapse.png "[-]")
