Posts: 405
Threads: 10
Joined: 2013-12-31
Points:
5,636
Reputation: +480
(2014-03-29, 12:26)drshoukath19 Wrote: [Only registered and activated users can see links Click here to register]
It's nothing specific to china phones or iNew. It's been here for decades...
You and
drshoukath19 like this post
If I helped you, clicking "Thank You" button will be enough.
Posts: 405
Threads: 10
Joined: 2013-12-31
Points:
5,636
Reputation: +480
(2014-03-30, 09:30)kokuo Wrote: (2014-03-29, 05:14)Burs Wrote: [...] But it would have been interesting to see how the phone would behave if you were using wcdma900 band on your wcdma850 phone with the original 1.0.1 firmware it came with...
I've just received another iNew V3 with 850/2100 on the back sticker but with 1.0.1 and baseband 25th feb as firmware (and 900/2000 bands enabled).
I'll check it right now and let you know 
EDIT:
I've tried and what I got was Just Edge connection 
Cheers
kok
Thanks for the info. I guess that's it. There must be some hardware modifications in
true wcdma900 version (engineer mode telling it has wcdma900 enabled, pretty much means nothing). If we don't have 900/2100 on the sticker below the battery, say bye-bye to wcdma900. Unless someone is more optimistic than me, I would say it's finally time to lock the thread. Thanks for all of your support.
GizBeat and
elransa84 like this post
If I helped you, clicking "Thank You" button will be enough.
Posts: 6
Threads: 1
Joined: 2014-03-13
Points:
68
Reputation: +9
2014-04-01, 05:13
(This post was last modified: 2014-04-01, 05:14 by paralog.)
One more thing if anybody wants to try. Might work for enabling 900, didn't work for me to enable 1900. But give it a shot, might work.
Open Mobileuncle Tools
-> Engineer Mode (Android) -> Phone information -> Press menu button -> Select radio band.
You should see entries like Automatic/EURO Band/Japan Band/AUS Band. Try selecting some band and press turn on radio. Make sure WCDMA preferred is set in network type. Good luck!
Credits: Saw this in the youtube video
You and
Burs like this post
Posts: 272
Threads: 9
Joined: 2014-01-11
Points:
1,934
Reputation: +150
It don't do nothing, only uncheck some boxes in band mode inside mediatek mode
You like this post
Posts: 405
Threads: 10
Joined: 2013-12-31
Points:
5,636
Reputation: +480
(2014-04-01, 05:13)paralog Wrote: Engineer Mode (Android) -> Phone information -> Press menu button -> Select radio band.
Thanks for the tip. But that only selects (not unlocks!) the neccessary bands for the choosen option. If you select Euro band, then only 900/2100 bands will be selected (depending on the V3 version you have), and other bands will be deselected. It's useful for newbies who don't know which frequency is used in which country, but either with all of them selected, it won't do any harm. Maybe some unnecessary band scanning when signal is too low to maintain it (slightly greater battery consumption?).
If I helped you, clicking "Thank You" button will be enough.
Posts: 21
Threads: 0
Joined: 2014-02-20
Points:
150
Reputation: +8
Today I got my Inew v3 and it is 900 mhz version, under battery is written, I order it from PRCfrog on 03.03. . They checked all functions before they send it to me. Baseband version 15/2/2014, build number 1.0.1
Posts: 41
Threads: 1
Joined: 2014-04-15
Points:
510
Reputation: +20
hello Guys,
here in Hungary we have an issue with Telenor Hungary as all the 850Mhz versions cannot make call when connected to 3g (H, H+), the call ended before starts.
When someones got the 900Mhz version they reported can call in Telenor network. After the 101 ROM release was able to download we did several flash on 850MHz phones and they turned into 900MHz phones without Telenor-bug.
So do I. But there is a serious new issue with 101 I got undercontrasted/undersaturated display with very highy ghosting of screen residues.
After I read your post of NVRAM backup/restore I am going to make a try:
- flash 101
- backup NVRAM
- flash 108
- restore NVRAM
You like this post
Posts: 256
Threads: 13
Joined: 2014-04-04
Points:
3,849
Reputation: +258
2014-04-22, 00:12
(This post was last modified: 2014-04-22, 00:13 by vampirefo.)
This ia a interesting thread, My C30 is is the 900/2100 I would like to find a 850 nvram to test on my phone, as 900 doesn't work in US only 850.
You like this post
If you use my scripts or work in your own scripts, your scripts or license should reflect that.
ZTE Open C
![[-]](https://www.chinaphonearena.com/forum/images/collapse.png "[-]")
