www.chinaphonearena.com

Full Version: How to root JLINKSZ K960 (MTK6592 OR T)
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4 5
(2016-02-24, 02:16)WORKER Wrote: [ -> ]For vKB012A I used scatter from vKB0004C, that in a folder. Sewed through WiseLinkTools, MultiPort chose ->scatter (a folder with firmware must be decompressed) chose ->Start All pressed ->tablet connected to the computer and sewing went. After successful completion called at Factory Mode (button of vol - and power, to wait till appearance of picture, press yet and vol+ and power to release), to choose a line with inscription of eMMs, to wait loading, if loading lasts more than 5 minutes, we take a needle or paper clip and do an upcast through opening near the keys of vol +/- and include a tablet.

Hello estimated, i'm have tablet "carbaystar (jslinkz) 9.6" octacore mt6592T 64gb rom 4gb ram 3G/4G", a few months ago when I bought the rootear could luckily with kingroot and after being 100% functional, decided to erase some apk that came rom integrated inadvertently delete an application called web.apk or similar (I calculate which was related to the browser system) and there began the problems that the system stopped, etc, then cometi several additional errors and when I went to the system to reset it by default from the android itself, was hung / frozen in the startup logo android, did hard reset, wipe, cache, etc. and no case would not start the android.

Now, I knew this forum looking for google without fatigue and found the firmware that you shared.

Today I flash the firmware tablet with vKB019E (KMT6580_EMMC_K960_V1.0_LEFUER-D4K107-AF.sca) and revived the tablet, obviously preloader uncheck the option in case.

Now I find that the touch is reversed, ie the x and y axes do not function properly, and with respect to the values ​​of the tablet could do something about it? to be back before or specifications is impossible without the original firmware from and appreciate your help because I am a rookie, of course thank you very much for your contribution and your knowledge. Best regards.

SPECS (Tablet opened):
K107-MB-3.0 (2015-09-30)
YLD-CEGA400-FPC-A0 APS033
BB CHIP: MT6580
MS BOARD: I960
KERNEL VER: 3.10.72 GCC VERSION 4.8
ANDROID: 5.1
SW VER= ALPS.LI.MP6.V2.JHZ6580.WEG.VF.L_P26
CUSTOM BUILD= VKB012A

TABLET SPEC WHEN BUY (ARGENTINA): CARBAYSTAR I960 64GB ROM 4GB RAM MT6592T OCTACORE 2GHZ
KERNEL: Linux version 3.10.72+ (buildserver@buildserver4) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Mon Jun 27 14:14:45 CST 2016
CODENAME: REL
Mainboard: K107
BRAND: K107
CPU_ABI: armeabi-v7a
CPU_ABI2: armeabi
DEVICE: K107
DISPLAY: K107_vKB072L_20160627
FINGERPRINT: K107/K107/K107:5.1/LMY47D/20160627.174308:user/dev-keys
HARDWARE: mt6580
ID: LMY47I
TAGS: dev-keys
This is the original OS detail.

General Specifications
Manufacturer Jlinksz
Model K107
Android version 5.1; vKB072L; SDK22
CPU 8 cores; ARMv7 Processor rev 3 (v7l) mt6580; Max: 1300.0 MHz; Min: 604.5 MHz
Display 1280 x 800; DPI: 210; Evaluated Size: 7.2"
Touch screen Multitouch 5 points
GPU Mali-400 MP; ARM; OpenGL ES-CM 1.1; OpenGL ES 2.0
RAM 1024 MB (984 MB available)
Flash 16 GB (14.412 GB actual); 0.156 GB (see memory map tab)
Pages: 1 2 3 4 5