www.chinaphonearena.com

www.chinaphonearena.com > Brand Specific > Vernee forum > [Vernee Mix 2] Official Vernee Mix 2 ROM download SP Flashtool
Full Version: [Vernee Mix 2] Official Vernee Mix 2 ROM download SP Flashtool
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2

Cleopatra

2017-12-23, 17:55
VERNEE MIX 2 - FLASHABLE STOCK ROM

[Image: 15p33mq.jpg]

Stock Rom 2017_12_15 Made by Me

4GB MODEL ONLY !

BUILD.PROP Technical Details :
ro.build.display.id=MIX_2_20171215
ro.build.version.incremental=1513320080
ro.build.version.sdk=24
ro.build.version.release=7.0
ro.build.version.security_patch=2017-11-05
ro.build.date=2017 12 15 14:41:06 CST
ro.build.date.utc=1513320066
ro.product.model=MIX 2
ro.product.brand=vernee
ro.product.device=MIX_2
ro.product.board=mt6757

NOTE: If you don't already have the MTK VCOM drivers installed, download and install these MTK VCOM auto drivers: [Only registered and activated users can see links Click here to register]

STEPS TO FLASH THE STOCK ROM :

1) Download the latest SP Flash Tool version at the next link :

[Only registered and activated users can see links Click here to register]

2) Open SP Flash Tool.
3) Load the scatter file inside stock firmware folder.
4) Select FIRMWARE UPGRADE option.

THEN

6) Turn off your phone (Power off)
7) Hold Volume-Up on the phone while connecting your turned off phone to the pc with USB cable.
8) Be patient until the flash process will be finished (100%).
9) Disconnect the USB cable.
10) Press power button.

Download Link :

Cleopatra stock: [Only registered and activated users can see links Click here to register]

Official Vernee Mix 2 ROM download stock: [Only registered and activated users can see links Click here to register]

Official Vernee Mix 2 ROM download stock mirror: [Only registered and activated users can see links Click here to register]

Smiling

GizBeat

2017-12-24, 03:15
Excellent job. Tried to flash the one Ghost uploaded and it wouldn't flash. Kept getting a hash mismatch error. Perhaps a scatter issue.

This one worked great. Updated and back to factory.

croxley

2017-12-24, 03:38
Can you install TWRP and root on this firmware.

GizBeat

2017-12-24, 12:43
(2017-12-24, 03:38)croxley Wrote: [ -> ]Can you install TWRP and root on this firmware.

Yes, can TWRP Vernee Mix 2 and root Vernee Mix 2, but there is still the issue of writing to /system. But most root functions should work fine. Xposed okay, the root app uninstaller I used worked no problem, giving root permissions to gsam, quick reboot, etc...

croxley

2017-12-24, 18:15
(2017-12-24, 12:43)GizBeat Wrote: [ -> ]Yes, can TWRP Vernee Mix 2 and root Vernee Mix 2, but there is still the issue of writing to /system. But most root functions should work fine. Xposed okay, the root app uninstaller I used worked no problem, giving root permissions to gsam, quick reboot, etc...

Can tell me how to root? I can get twrp but it is not installed on system.

taslpeer

2017-12-24, 20:35
Hi Cleopatra,

I followed your instruction to flash stock ROM on Vernee Mix 2... But I could not get the MTK Preloader USB driver to load as when I press the volume - or + button followed by Power button at the same time and connect USB to PC, the Preloader device appeared for a couple of seconds and disappeared as the mobile start charging..

How did you managed to flash the ROM with the Preloader driver not loaded?

As the vernee mix 2 battery is inbuilt, how can we do the Flashing?

Waiting for your reply. Smiling

Best regards,
taslpeer

cookiedough

2017-12-24, 22:12
(2017-12-24, 20:35)taslpeer Wrote: [ -> ]Hi Cleopatra,

I followed your instruction to flash stock ROM on Vernee Mix 2... But I could not get the MTK Preloader USB driver to load as when I press the volume - or + button followed by Power button at the same time and connect USB to PC, the Preloader device appeared for a couple of seconds and disappeared as the mobile start charging..

How did you managed to flash the ROM with the Preloader driver not loaded?

As the vernee mix 2 battery is inbuilt, how can we do the Flashing?

Waiting for your reply. Smiling

Best regards,
taslpeer
Just hold volume up before and when you connect. Not power. When you see the red bar, then release volume. If you have the preloader drivers installed, it should begin to flash.

cookiedough

2017-12-24, 22:18
(2017-12-24, 18:15)croxley Wrote: [Only registered and activated users can see links Click here to register]

In TWRP, select INSTALL and then find that .zip. That's it Fu Man

taslpeer

2017-12-25, 00:04
Unfortunately, your instruction did not succeed! Sad It goes to the bootoader menu when volume up is still pressed and usb connected to PC...

Do you have any other workaround?

Best regards,

cookiedough

2017-12-25, 00:36
(2017-12-25, 00:04)taslpeer Wrote: [ -> ]Unfortunately, your instruction did not succeed! Sad It goes to the bootoader menu when volume up is still pressed and usb connected to PC...

Do you have any other workaround?

Best regards,

You're either doing something wrong, or the drivers aren't properly installed or there's a driver conflict.

With the phone powered off, click Download in SP Flash. Hold volume up while connecting the USB to PC.

If the flash doesn't start, try a different USB cable, and a different USB port. If you have a different PC, try that as well. You can also try uninstalling all adb and vcom drivers and do a fresh install.

Does your phone boot into Android okay, or are you currently bricked?
Pages: 1 2
www.chinaphonearena.com > Brand Specific > Vernee forum > [Vernee Mix 2] Official Vernee Mix 2 ROM download SP Flashtool