hi..can you make a video tutorial step by step to make it easy. a million of people outside want you to do this,and they will appreciate you. thanks again..
Hello Gizbeat ,after rooting success , i had
to install playstore and the market-
I have done what you said .That's perfect now!
Using the new recovery mode CWM , i installed very easyly the Gapps.zip for my version of Android (4.1.2)
I downloaded it from
[Only registered and activated users can see links Click here to register] were the gapps for all android versions can be found.
It was not necessay to install gapps fixer.zip (sometimes recommanded)
The "How to" can be seen on this video
It was not necessary to modiy the build.prop to simulate a phone that Google play recognises-My unknown T700 chinese tablet is accepted without doing anything else.
Sincerely, thank's for everything (also again for Rey69), a fresh beer for you again.
Best Regards
Pierre
Great it worked out.
Thanks much for the donation and for posting here at CPA.
hi
i have rooted my bedove x21 step by step and its goes smoothly.
thank you very much for your work
This is rey69's tutorial, however I must amend it to say that most phones SHOULDN'T have to flash patched_boot.img as well. First time around, please just try flashing patched_recovery.img and leave your boot.img alone.
hi, i haved tried to follow this tuto but a failled at the step for installing ADB driver.
I just want to upgrade my 4.0.9 android version to the 4.1.2. There is no a tuto more easier, for exemple a rom and in the Recoverymod i do a clean cache factory reset etc and "install zip from SDcard" ?!!!!!!!!!!!!
Try the PDAnet ADB driver in the MTK Tools sub-forum.
(2013-07-11, 04:46)Gizbeat Wrote: [ -> ]Try the PDAnet ADB driver in the MTK Tools sub-forum.
i understand nothing and my english is badass.. Need a more easy tutorial or a video
Wonderfull tutorial, worked like a charm.
Thank you x1000.
(2013-06-11, 02:57)rey69 Wrote: [ -> ]Hello everybody,
after some weeks trying to root my Bedove X21 phone by using every method published in this forum and other, I have learned soe things and specially why I got problems and how to face them. I finally rooted my phone and I would like to share this experience with you. For experienced users I will include a summary of steps here, and for those doing this for first time or wanting more information I recommend to read the attached detailed tutorial.
Summary:
1. Ensure you have the correct USB drivers
- Remove old drivers from previous android devices using usbdeview tool
- install MT6577 USB VCOM drivers [Admin: Anyone having issues with proper driver install can try PDA VCOM Drivers. See the stickies]
- Mediatek Preloader USB VCOM Port must be shown for some seconds in Device Manager when switched OFF phone is plugged-in. If it is not shown, then you must solve this before going ahead.
2. Create scatter file with MTKDroidTools (version used 2.4.6)
3. Extract ROM from phone using SP Flash Tool (version used 3.1304.0.119)
- Switch OFF phone
- Open Sp Flash Tool
- Load Scatter file
- Add ROM file to save in Read Back tab
- Set start block (0x00000000) and size (use CACHE start address from scatter file)
- click Read Back to start process
- plug in switched OFF phone to USB, extraction process will start
- if successful, a green circle will be shown and a big file with your ROM (just part of it) will be saved in your disk
4. Extract partitions from ROM file and patch them with MKTDroidTools
- switch on phone and start MTKDroidTools
- Select tab “root, backup, recovery” and click “ To process file ROM_from Flash Tool”
- select ROM file saved in step 3
- click YES when asked if you want to mke CWm recovery automatically
- wait until process is finished. A folder named "backup" should have been created under MTKdroidTool folder, and under most recent subfolder some files with images of ROM partitions + scatter file (patched _PMT.txt or only .txt) + patched boot image + patched recovery image.
5. Flash patched recovery and boot using Sp Flash Tool.
- Copy patched scatter file (original-scatter-filename_PMT.txt) + patched boot and recovery files to an empty folder. If there is no _PMT.txt file, copy the existing scatter file (.txt, same as original created in second step). Rename patched boot and recovery files to boot.img and recovery.img
- switch OFF phone and unplug it from USB
- run SP Flash Tool
- load scatter file (_PMT.txt or .txt if _PMT was not created in step 4) and check only BOOTIMG and RECOVERY are selected [Admin: This is rey69's tutorial, however I must amend it to say that most phones SHOULDN'T have to flash patched_boot.img as well. First time around, please just try flashing patched_recovery.img and leave your boot.img alone.]
- click Download
- plugin switched OFF phone to USB. Flash process should start
- if successful, a green circle will be shown
6. Root your phone with MTKDroidTool
- unplug phone
- open MTLDroidTool and go to "root, backup, recovery” tab
- boot phone to recovery mode (vol-up + power)
- plugin to USB
- option "SuperUser" should become available as soon as phone is recognized
- click SuperUser
- done
And that's all. For more details please follow the detailed pdf tutorial. It is obvious to say that these steps worked for me, it is not guaranteed that will work for you.
Good luck!
So,
I did a great shit in my device, it's a bedove x21, in a stupid moment i changed the file wlan.ko of my device, now my wifi connection don't work, in fact, the device can't connect or find any wirelles network. Tragic!!! Can you help me with my problem? I think which replacing the wrong file from the original file the things will work.