(2013-06-25, 18:57)Gizbeat Wrote: [ -> ] (2013-06-25, 18:49)newlife229 Wrote: [ -> ] (2013-06-25, 18:46)Gizbeat Wrote: [ -> ]You said you put CM7 as well....?
What scatter file did you use when you flashed CWM and CM7?
i've putted only CWM, no rom, i changed only the recovery with MTK
I've used the scatter file generated by SP Flash tool....
You should generate a scatter with MTK Droid Tools... Not SP Flash
yes sorry it's created with Mtk droid tools.... sorry!!!
(2013-06-25, 19:01)newlife229 Wrote: [ -> ] (2013-06-25, 18:57)Gizbeat Wrote: [ -> ] (2013-06-25, 18:49)newlife229 Wrote: [ -> ]i've putted only CWM, no rom, i changed only the recovery with MTK
I've used the scatter file generated by SP Flash tool....
You should generate a scatter with MTK Droid Tools... Not SP Flash
yes sorry it's created with Mtk droid tools.... sorry!!!
Hmmm... Well it's very very strange. Assuming you used the proper scatter, you should of only flashed over recovery in the proper place, which even if it screwed up your phone shouldn't affect anything about the phone being recognized by PC. Unless you flashed a different preloader as well? Also, I'm assuming you used a recent version of MTK Droid Tools? (2.4.2 or newer).
Did you try doing what I recommended... Remove the drivers and reinstall with PDAnet drivers from the stickies.
(2013-06-25, 19:13)Gizbeat Wrote: [ -> ] (2013-06-25, 19:01)newlife229 Wrote: [ -> ] (2013-06-25, 18:57)Gizbeat Wrote: [ -> ]You should generate a scatter with MTK Droid Tools... Not SP Flash
yes sorry it's created with Mtk droid tools.... sorry!!!
Hmmm... Well it's very very strange. Assuming you used the proper scatter, you should of only flashed over recovery in the proper place, which even if it screwed up your phone shouldn't affect anything about the phone being recognized by PC. In other words, the preloader should still be intact. Unless you flashed a different preloader as well? Also, I'm assuming you used a recent version of MTK Droid Tools? (2.4.2 or newer).
Did you try doing what I recommended... Remove the drivers and reinstall with PDAnet drivers from the stickies.
I used MTK 2.4.6
Scatter file is created with your tutorial and i maked the ROM_0 with SPFlashtools with the Readback function, green circle ok.
Download mode, it showed up CWM recovery ok... I pressed System Reboot Now. and no boot logo, it's death, no download/recovery mode..... Crap :S
I flashed only boot.img adn recovery.img
(2013-06-25, 19:17)newlife229 Wrote: [ -> ] (2013-06-25, 19:13)Gizbeat Wrote: [ -> ] (2013-06-25, 19:01)newlife229 Wrote: [ -> ]yes sorry it's created with Mtk droid tools.... sorry!!!
Hmmm... Well it's very very strange. Assuming you used the proper scatter, you should of only flashed over recovery in the proper place, which even if it screwed up your phone shouldn't affect anything about the phone being recognized by PC. In other words, the preloader should still be intact. Unless you flashed a different preloader as well? Also, I'm assuming you used a recent version of MTK Droid Tools? (2.4.2 or newer).
Did you try doing what I recommended... Remove the drivers and reinstall with PDAnet drivers from the stickies.
I used MTK 2.4.6
Scatter file is created with your tutorial and i maked the ROM_0 with SPFlashtools with the Readback function, green circle ok.
Download mode, it showed up CWM recovery ok... I pressed System Reboot Now. and no boot logo, it's death, no download/recovery mode..... Crap :S
I flashed only boot.img adn recovery.img
What boot.img did you use? When you read the firmware back, what did you read back? The whole thing? Or...?
(2013-06-25, 19:26)Gizbeat Wrote: [ -> ] (2013-06-25, 19:17)newlife229 Wrote: [ -> ] (2013-06-25, 19:13)Gizbeat Wrote: [ -> ]Hmmm... Well it's very very strange. Assuming you used the proper scatter, you should of only flashed over recovery in the proper place, which even if it screwed up your phone shouldn't affect anything about the phone being recognized by PC. In other words, the preloader should still be intact. Unless you flashed a different preloader as well? Also, I'm assuming you used a recent version of MTK Droid Tools? (2.4.2 or newer).
Did you try doing what I recommended... Remove the drivers and reinstall with PDAnet drivers from the stickies.
I used MTK 2.4.6
Scatter file is created with your tutorial and i maked the ROM_0 with SPFlashtools with the Readback function, green circle ok.
Download mode, it showed up CWM recovery ok... I pressed System Reboot Now. and no boot logo, it's death, no download/recovery mode..... Crap :S
I flashed only boot.img adn recovery.img
What boot.img did you use? When you read the firmware back, what did you read back? The whole thing? Or...?
i've used the boot.img from the readback.
From the readback i've readed all thing.... when downloaded only boot and recovery .img
Anyway can't install pdanet because the installer wanna me to put in USB, and when i connect it don't work and don't installa the driver
I'm sorry this happened New Life. It's just a guess, but it might be because of flashing boot.img as well, which I've never in my life had to do that to get CWM working. But because you used the scatter file for your phone and the boot.img read back from your phone, it still shouldn't have made a difference. It's also very strange it booted one time okay.
My only suggestion at this point is have someone with a RIFF box reformat your flash.
(2013-06-25, 19:46)Gizbeat Wrote: [ -> ]I'm sorry this happened New Life. It's just a guess, but it might be because of flashing boot.img as well, which I've never in my life had to do to get CWM working. But because you used the scatter file for your phone and the boot.img read back from your phone, it still shouldn't have made a difference. It's also very strange it booted one time okay.
My only suggestion at this point is have someone with a RIFF box help by reformatting your EMMC.
Thank you for your time Gizbeat
I'm hoping that can find some1 witha RIFF box....
Test point method it's hard to make???
Crap that with no.1p7 i can't pull out battery
(2013-06-25, 19:54)newlife229 Wrote: [ -> ] (2013-06-25, 19:46)Gizbeat Wrote: [ -> ]I'm sorry this happened New Life. It's just a guess, but it might be because of flashing boot.img as well, which I've never in my life had to do to get CWM working. But because you used the scatter file for your phone and the boot.img read back from your phone, it still shouldn't have made a difference. It's also very strange it booted one time okay.
My only suggestion at this point is have someone with a RIFF box help by reformatting your EMMC.
Thank you for your time Gizbeat
I'm hoping that can find some1 witha RIFF box....
Test point method it's hard to make???
Crap that with no.1p7 i can't pull out battery
Hmmm... Test point method is for unlocking boot loaders. From what I know, it wouldn't help you in this situaton.
I also wonder if you can't get recognized by ADB because you can't pull the battery. Sometimes that's required. It's just a shot in the dark.
(2013-06-25, 20:03)Gizbeat Wrote: [ -> ] (2013-06-25, 19:54)newlife229 Wrote: [ -> ] (2013-06-25, 19:46)Gizbeat Wrote: [ -> ]I'm sorry this happened New Life. It's just a guess, but it might be because of flashing boot.img as well, which I've never in my life had to do to get CWM working. But because you used the scatter file for your phone and the boot.img read back from your phone, it still shouldn't have made a difference. It's also very strange it booted one time okay.
My only suggestion at this point is have someone with a RIFF box help by reformatting your EMMC.
Thank you for your time Gizbeat
I'm hoping that can find some1 witha RIFF box....
Test point method it's hard to make???
Crap that with no.1p7 i can't pull out battery
Hmmm... Test point method is for unlocking boot loaders. From what I know, it wouldn't help you in this situaton.
I also wonder if you can't get recognized by ADB because you can't pull the battery. Sometimes that's required. It's just a shot in the dark.
So it's impossible to try something..... Strange......... :S
(2013-06-25, 20:06)newlife229 Wrote: [ -> ] (2013-06-25, 20:03)Gizbeat Wrote: [ -> ] (2013-06-25, 19:54)newlife229 Wrote: [ -> ]Thank you for your time Gizbeat
I'm hoping that can find some1 witha RIFF box....
Test point method it's hard to make???
Crap that with no.1p7 i can't pull out battery
Hmmm... Test point method is for unlocking boot loaders. From what I know, it wouldn't help you in this situaton.
I also wonder if you can't get recognized by ADB because you can't pull the battery. Sometimes that's required. It's just a shot in the dark.
So it's impossible to try something..... Strange......... :S
Well you seem to be hard bricked. Not many options at that point other than formatting EMMC with RIFF.
As I alluded to, the only other option might be to open your phone and disconnect the battery for a second, then reconnect and see if you can get recognized on your PC. I don't hold much hope this will work, I'm just making a shot in the dark.
You should be able to find a RIFF box owner in your country on XDA.
I hope your problem gets worked out.