I need help. I have a bricked BMXC K107 (16Gb version, i've checked the NAND chip under the cover). I had read this topic over and over, but no solution...
This board is a K107MB 5.0. I've downloaded this ROM: vKB076N that listed above.
Every scatter file in it isn't working for my tablet, when i use BeeTools.
When i connect the tablet it says "S_STORAGE NOT MATCH (Error code 3183)" See attached picture.
So the flash process started, but, problem occured, maybe with the NAND storage size?
I need help. I have a bricked BMXC K107 (16Gb version, i've checked the NAND chip under the cover). I had read this topic over and over, but no solution...
This board is a K107MB 5.0. I've downloaded this ROM: vKB076N that listed above.
Every scatter file in it isn't working for my tablet, when i use BeeTools.
When i connect the tablet it says "S_STORAGE NOT MATCH (Error code 3183)" See attached picture.
So the flash process started, but, problem occured, maybe with the NAND storage size?
The firmware for the K107 v4.1 link isn't working anymore? Where can I get a working firmware for it please! The tablet has the mtk8321a on board with 1gb ram and 16b rom. The usual set up.
same situation as you guys,my tab died while recharging,didn't even had tried to install any dumb apps on it...i wander if isn't a memory issue after all..like a broken hard drive
Доброго времени суток. У меня планшет BRAND: BMXC
Материнская плата:
Sim2
K107-MB-V3.0
2015-9-30
K960AC-V3.0
PD:4+B1
160306
K107ACV3.0_vKBZ004_SMT_K960
K107AC-V3.0 BLDA7
B20160217_1G16G
После падения и замены LCD display (BP096WX1-100) на новый экран черный. Пробовал прошивки - экран реагирует на кнопку пуск и идет подсветка, но экран черный и система не запускается. Прошу помощь в нахождении прошивки для этой ревизии планшета. Заранее благодарен.
Good day. I have a BRAND tablet: BMXC
Motherboard:
Sim2
K107-MB-V3.0
2015-9-30
K960AC-V3.0
PD:4+B1
160306
K107ACV3.0_vKBZ004_SMT_K960
K107AC-V3.0 BLDA7
B20160217_1G16G
After dropping and replacing the LCD display (BP096WX1-100) on the new screen is black. Tried the firmware - the screen responds to the start button and goes backlighting, but the screen is black and the system does not start. I ask for help in finding the firmware for this revision of the tablet. Thanks in advance.