Hard bricked mt6589..... plz help

[guardr0]

yes...can't switch on, can't charge the phone...but everytime connect cable to pc, i do hear that sound...and if pressed vol - , it will instal driver for the phone...that's all the problem i got...btw, the link can't be opened...maybe it's not the full link..when clicked, the three dots went to the address bar 'showthre...st44565711' like this

[stevenma61]

go to forum xda developer
n serach
iNew i6000 (and other Chinese 6.45" FHD phones
at the latest post u should see my posted sample

at the moment, the only way to recover is to cable flash. (not card flash).
u can try to see if any cable flash rom that r quite similar to yr phone, and try to flash it, anyway there is no harm done

---

do u have a team viewer installed in yr computer, if so i can help u remotely

[guardr0]

no i did not install tv...plus my connection kinda bad...i always do cable flash...but this time, its all about the preloader.bin...i wrongly flash the firmware for other model into mine...so the system dead...

[stevenma61]

no i did not install tv...plus my connection kinda bad...i always do cable flash...but this time, its all about the preloader.bin...i wrongly flash the firmware for other model into mine...so the system dead...

i saw a preloader.bin in yr backup file.

have u tries to flash the backup file directly with the SP flash tool

[guardr0]

SP FLASH TOOL ERROR : (8200)

[Platform error] The load and target are inconsistent!

[HINT]:
The load to be downloaded is for MT6589;
The platform is .
Please select the correct load according to the target to download.

**that's what the error from SPFlashtool i got when trying to flash the full firmware, or flash only preloader, or flash firmware that similar to my device...looks like my phone is dead....i don't know how to make it alive back

[stevenma61]

SP FLASH TOOL ERROR : (8200)

[Platform error] The load and target are inconsistent!

[HINT]:
The load to be downloaded is for MT6589;
The platform is .
Please select the correct load according to the target to download.

**that's what the error from SPFlashtool i got when trying to flash the full firmware, or flash only preloader, or flash firmware that similar to my device...looks like my phone is dead....i don't know how to make it alive back

may be u have to wait for somebody upload the file, or get the cable flash rom from yr shop which u bought.

or try this the last way i can think of

try to read back yr rom in the phone with the sp flash tool

create a folder name AAA, put the 6589 scatter file in it
then run the sp flash tool, scatter the file under AAA, then hit the tab in the flash tool "read back", then add a file(if u don't have any line under the box), then double click the file, save the file (by default the name is ROM_O) change the starting address to 0X0 , and the length to 0x20000000 (twenty million) must start like 0x

so now the dialog box should like this

under readflag column : PageSpare
under start address : 0x000000000 ( does not matter how many zeros)
under length : 0x20000000

now hit the button "read back with an arrow sign"
connect yr phone(without the battery) to the computer

if it is ok, u shoulde finish it around 20 minutes

let me know if u get get the ROM_0 in the folder
the size of the ROM_0 is about 538 M

Edit:
i know the ROM_0 after u process will get back to yr situation now, what i want to see , if u can read back the rom_0, then after process, change some of the file to the one u back up with MTK droid tool, might be it will work.

[guardr0]

done everything as u mentioned at the above, but i get this error after connect my phone without battery

BROM ERROR: S_DA_EMMC_FLASH_NOT_FOUND (3144)

i think i fully give up now thanks for all your effort sir stevenma61...only God can pay yr kindness....

[cupi1234]

i think i fully give up now

DON'T GIVE UP!!!

Hi guys! I'm new here and I found this topic cause I have the same problem.
I have an ALLVIEW P5 QUAD phone witch is the same as Fly IQ446/Gionee GN708W/Xolo Q800/Symphony w125/QMobile Noir A20/Polytron W7450.
Flashed with wrong firmware (including preloader) , and the phone is death. No charge , no recovery etc...
Now is OK again

Followed he description of user stevenma61
"1- MTK droid root n tools ( i assume that u already have)
2 - SP flash tool v3.1316
3 - backup rom ( that u previously backup with the MTK droid root n tool)
- let me name yr back up rom as "ROM_AAA"

now run the mtkdroid root n tools.
hit the tab "root, backup ,recovery"
then hit the button "To prepare blocks for Flash Tool"
then choose the ROM_AAA, then choose "file.md5"
then let it process, after finish( take about 10 over minutes)
then u should see a file name "!Files_to_FlashTool" under the file folder "ROM_AAA"

now run the SP flash tool, then the scatter the file
choose the scatter file from file folder "!Files_to_FlashTool"
then hit the button "Download"

now connect yr phone (without the battery) to yr computer, if everything is ok, it should be able to finish in about 2/3 minutes, then the geen circle.
then u are done, put back the battery, reboot the phone"


I try to flash with battery and without battery , tried in multiple ways..
At least try to flash with battery but hit the "Firmware upgrade" button.
It give me an error (don't remember ) , but I have files missing from ROM.
The MTKDROIDTOOLS don't create some files from my backup.
After that I copy/paste the missing files from another clone firmware -Xolo-Q800- (fat.img ,secro.img ,userdata.img ,cache.img)
After that again "Firmware update" , connect the phone and ...nothing.
Once tried to take out the battery , press the volume up for 20 seconds with usb cable connected (read somewhere this is hard reset)
Tried in that way for five or six times and after that the process will go !!!

NOW MY PHONE WORKING AGAIN !!!!!!!!!!!!

Don't give up!

excuse my English

[elfanto]

Hi, i have a problem similar, i made a backup with the MTKDroidTools, then i flashed a wrong firmware to my phone (Not on purposse), and SP Flash tools show me this error when i try to download the preloader that was in my backup firmware

SP FLASH TOOL ERROR : (8200)

[Platform error] The load and target are inconsistent!

[HINT]:
The load to be downloaded is for MT6589;
The platform is MT6572_S00
Please select the correct load according to the target to download.

Try to read back the and it made it, can you help me? I don't know what to do next

[stevenma61]

Hi, i have a problem similar, i made a backup with the MTKDroidTools, then i flashed a wrong firmware to my phone (Not on purposse), and SP Flash tools show me this error when i try to download the preloader that was in my backup firmware

SP FLASH TOOL ERROR : (8200)

[Platform error] The load and target are inconsistent!

[HINT]:
The load to be downloaded is for MT6589;
The platform is MT6572_S00
Please select the correct load according to the target to download.

Try to read back the and it made it, can you help me? I don't know what to do next

try to look into yr back up made by MTK droid , look for file "MT6589_Android_scatter_emmc_PMT.txt"

if u can find it, copy this file and replace the file "MT6589_Android_scatter_emmc_.txt in yr rom folder, then run the SP flash tool , and scatter this file and try to flash it again