(2015-12-02, 23:42)tlkn Wrote: [ -> ] (2015-12-02, 22:45)lililomgo Wrote: [ -> ]I can t download TWRP recovery with your link it says error 404 file deleted
That's probably because you are not registered with the message board you are trying to download the file from. Come on, at least make some effort 
Anyway, someone made you guys a giant favor and uploaded a folder with all the necessary stuff, including a ROM for this device, which they created in accordance with my instruction, using their own device.
There is at least one guy, who flashed this ROM and got his phone unbricked - in fact, he is the one, who messed it up with an OTA update.
And it will work for the rest of you, too - another dude, who had his preloader formatted, recovered it with my preloader.bin, and is about to flash above ROM soon, and I can foresee no problems with that.
So what the sequence of actions?
1. Install recovery:
oukiK4000recovery.zip from recovery menu from sd card?
2. From new, custom recovery install backup - file:
TWRP.rar
?
(2015-12-03, 02:28)Tazovsky Wrote: [ -> ]So what the sequence of actions?
Well I see you are getting help @ another forum. Anyway... The sequence of actions is
1. Read all there is to read about flashing phones via SP Flash Tool;
2. Download and unpack the firmware (I've provided the link above);
3. Follow any instruction on flashing the firmware (
this will do for example, except you will be checking all the boxes, except for preloader)
If your phone shows logo when turned on, your preloader is probably fine and it's better not to fiddle with it. You do not need TWRP at all to recover your bricked phone.
(2015-12-04, 11:44)tlkn Wrote: [ -> ] (2015-12-03, 02:28)Tazovsky Wrote: [ -> ]So what the sequence of actions?
Well I see you are getting help @ another forum. Anyway... The sequence of actions is
1. Read all there is to read about flashing phones via SP Flash Tool;
2. Download and unpack the firmware (I've provided the link above);
3. Follow any instruction on flashing the firmware (this will do for example, except you will be checking all the boxes, except for preloader)
If your phone shows logo when turned on, your preloader is probably fine and it's better not to fiddle with it. You do not need TWRP at all to recover your bricked phone.
The devil is in details... It is tricky to boot oukitel in preloader mode.
For all who don't know how to do it:
1. remove battery
2. wait few seconds
3. insert usb cable into computer
4. insert usb cable into oukitel
6. insert battery
while holding VOLUME+
6. when computer detect phone and you hear beep you should let go
VOLUME+ button
7. your phone should have
black/turned off screen and in device manager you should see
MT9xxxxx preloader* and install drivers.
You will probably need to take few tries to boot in preloader mode. Just sesne the moment of letting go
VOLUME+ button,
I used
SP-Flash-Tool-v5.1532.00 and this drivers:
https://drive.google.com/file/d/0B1PtPEo...sp=sharing
*I do not exactly remember the name.
Thanks all, I've now my phone, thanks again for your help everyone
and I rooted it
A last special thanks you all
(2015-12-06, 00:35)lililomgo Wrote: [ -> ]Thanks all, I've now my phone, thanks again for your help everyone and I rooted it
A last special thanks you all
So what did it work for you? Resetting to factory settings and then apply that update via wireless update?
I've tried all ways, but id does not work for me.. not sure why.
I try method 1, using update.zip. If i do it via Wireless update, phone reboot, say installing update, finishes, but when is back i have no root access. (at least root checker says so)
I also trued to do it via recovery menu, but when doing that after i select the zip file i get a message that say "Installation aborted"
Not sure if this is important, but i used the wireless update to update the system. I did a factory reset from recovery menu, and tried again, but still not work. From what i can see, the factory reset did not returned the old system back, just wiped data.
Any suggestions?!
Thanks
Pls is dere any way to root infinix hot not pro runing on lollipop
will this work for the U10 ive been trying for weeks to root it
im looking at the scatter file in that zip file
I am familiar with digital forensics, if I make sure that the U10 memory locations for the items below are correct and update the scatter file to reflect the U10 then would it root the phone.
pgpt 0x0
proinfo 0x80000
nvram 0x380000
protect1 0x880000
protect2 0x1280000
lk 0x1c80000
para 0x1d00000
boot 0x1d80000
recovery 0x2d80000
logo 0x3d80000
expdb 0x4580000
seccfg 0x4f80000
oemkeystore 0x5000000
secro 0x5200000
keystore 0x5800000
tee1 0x6000000
tee2 0x6500000
frp 0x6a00000
nvdata 0x6b00000
metadata 0x8b00000
system 0xb000000
cache 0x6b000000
userdata 0x84000000
flashinfo 0x3a2d80000
sgpt 0x3a3d80000
@ tlkn your post really worked I appreciate