www.chinaphonearena.com

(2017-05-19, 00:06)Cleopatra Wrote: [ -> ]

(2017-05-18, 23:55)rlaptev Wrote: [ -> ]

(2017-05-18, 23:50)Cleopatra Wrote: [ -> ]@rlaptev :

To buy a not fully compatible spare part.
It happened to somebody else.
It is not common, but it can happen.
Look for similar lcd on the net.
Try to understand serial numbers (or something like that).
Compare similarities and differences from different sellers.

Thank you. So it's better to return LCD back.

I did not say that.
Before to return lcd back, look for similar lcd on the net.
Before accusing the seller ... try to understand the lcd issue.

Ok, thank u.

Oukitel U7 Plus - NEW TWRP 3.0.3 for Nougat



This TWRP is intended for the next Nougat firmware version :

ro.build.id=NRD90M
ro.build.display.id=OUKITEL_U7_Plus_V16.0_20170609
ro.build.version.incremental=1497090504
ro.build.version.sdk=24
ro.build.version.release=7.0
ro.build.version.security_patch=2017-06-05
ro.build.date=2017 06 10 18:28:19 CST
ro.build.date.utc=1497090499
ro.build.flavor=full_hct6737m_65_n-user


Download Link :

https://www.needrom.com/download/u7-plus...ugat-twrp/


INSTALLATION STEPS :

1) Above all download and install the OTA V16.0_20170609 :



After barely managing to find the OTA zip, finally I have found the it

The OTA zip is in a non-conventional place/path. I wish to share it with all.
Maybe some developers might be interested to it.
OUKITEL_U7_Plus_V16.0_20170609 OTA zip :

https://mega.nz/#!75swBA6a!X5dj26qLwA29R...ZAxy59KTIA

2) Tap on Settings --> About phone --> Tap Build number seven times.
Developer options --> OEM unlocking enabled and USB debugging enabled.

3) Download SuperSU v2.82 zip and BusyBox 1.26.2 zip at the next link :

http://www.mediafire.com/file/tdtv1xdy2m...e_2017.rar

4) Unrar the rar. Copy the 2 zips onto your microSD.
5) Open SP Flash Tool.
6) Unrar U7_Plus-TWRP_3.0.3-NEW.rar
7) Load the scatter file inside the folder.
8) Select Download Only option.
9) Click Download.
10) Connect your turned off phone to the pc with USB cable.
11) Disconnect the USB cable.
12) Enter onto twrp recovery (volume up + power buttons simultaneously).
13) Select the first white line and press volume down.

VITAL STEPS :

14) Tap Install, Select Storage, Micro SDCard, OK.
15) Tap on SR1-SuperSU-v2.82-SR1-20170608224931.zip
16) Swipe to confirm Flash.
17) Tap on Reboot.
18) Tap on the icon of SuperSU to activate it.
19) Repeat same steps for Busybox v1.26.2 zip

I strongly recommend you to install the next apk (root required) :

https://play.google.com/store/apps/detai...boot&hl=en

It is useful to avoid to press volume up + power buttons to enter onto twrp.

(2017-06-23, 06:06)arnegson Wrote: [ -> ]What is happening? I downloaded OTA and would install it and ended up recovering and can not get into the program. Every time I try to start the phone, I get into recovery. And it's 3.0.3 that I have but I can not start the phone so it's possible to call it ??????

You cannot install the OTA update with TWRP recovery and rooted phone !

STEPS TO DO BEFORE to install the OTA update :

1) Flash the old Nougat firmware (Firmware Upgrade option).
2) Tap on System Updater icon.
3) Download the OUKITEL_U7_Plus_V16.0_20170609 OTA
4) Install the OUKITEL_U7_Plus_V16.0_20170609 OTA

(2017-01-13, 02:07)Cleopatra Wrote: [ -> ]OUKITEL U7 Plus - NEW stock rom V20.0_20161220



ROM INSTALLATION STEPS :

1) Download the latest version (5.1648.00) of SP Flash Tool :

http://www.mediafire.com/file/qwgshpgipx...648.00.rar

2) Download the stock firmware V20.0_20161220 :

https://mega.nz/#!C49WQbbT!YjPK66SNtsKrV...RDMPhDfBcs

3) Flash the firmware with SP Flash Tool (Download Only mode).


OUKITEL U7 Plus - NEW TWRP 3.0.3



TWRP INSTALLATION STEPS :

a) Tap on "Settings" -->"About phone" --> "Build number".
b) Tap 7 times on "Build number".
c) Tap on "Developer option" and enable "OEM unlocking" and "USB debugging".
d) Download the latest version of SP Flash Tool :

http://www.mediafire.com/file/qwgshpgipx...648.00.rar

e) Download the NEW TWRP 3.0.3 at the next link :

http://www.needrom.com/download/u7-plus-twrp-3-0-3/

f) Turn off the phone.
g) Open SP Flash Tool, load the scatter file and click on Download.
h) Connect your phone to your pc with USB to start the flash process.
i) When it finished, press "volume up" and "power" buttons simultaneously.
j) Select the first white line with volume up.
k) Press volume down to confirm.
l) Enjoy.

hi
i'm french sorry if i write bad
i can't get the v.20

Votre téléchargement ne peut pas se poursuivre, car cela vous ferait dépasser le quota de transfert gratuit alloué à votre adresse IP.

how can i do please?

@gwendo38180 :

Your french language :

Votre téléchargement ne peut pas se poursuivre, car cela vous ferait dépasser le quota de transfert gratuit alloué à votre adresse IP.

English translation :

Your download can not continue because this will cause you to exceed the free transfer quota allocated to your IP address.

SUGGESTION :

Go from a friend or neighbor,
and try to download the V20 firmware using his pc.

Hello,

I'm sticking with Marshmallow because I need xposed, and the gains from Nougat are not greater than the losses from no xposed, I'm on Cleopatra's last/latest marshmallow update .zip and TWRP 3.0.3 from needrom. All is working fine EXCEPT... I cannot restore ANY backup from TWRP.
Majority of the time an error is 'invalid argument' to do with no system, or not mounted, can 'fix' the system or change the file system within TWRP and try to restore, then restore just system and that wont boot either.
Can flash the rom and update again and restore data and THAT boots fine but everything goes wrong once installed as I have all google removed, and microG and xposed.
Have a ported AICP rom that also isnt booting from TWRP but I dont know if thats the rom or something else, as the stock rom backup wont boot either. Have tried:

Straight restore, no wipes
restore, full wipes, reboot
full wipes, restore
full wipes, restore, dalvik
suzip, restore, reboot
restore, suzip, reboot
Reflash firmware, restore all
reflash firmware, restore data (this boots but is so modified it is unusable)

And various combinations of these. Any help greatly appreciated

@robneymcplum :

Hello.

Above all, please tell me your build number.

Backup steps :

Check marks only on Nvram, Boot, System and Data.

Restore steps :

1) Tap on "Wipe".
2) Tap on "Advanced Wipe".
3) Select Dalvik/System/Cache/Data/Internal Storage BUT NOT Micro SDCard.
4) Swipe to Wipe.
5) Return to main menù of TWRP.
6) Tap on "Restore".

Regards

YAY!

I assumed just restoring Nvram, Boot, System and Data would work, and it did!
So, thanks for that
Now I can get this AICP rom working.

Thanks.

I have another issue...

I've lost my IMEI numbers somehow, On the last marshmallow, and I have nvram.img backed up, changed scatter file to 'true' and changed the file name to 'nvram.img' but it isnt backing up with spflashtools, and engineer mode has no CDS to change it there.

Any ideas to try and fix this?

Cheers.

Hi Cleo, I have a oukitel u7 plus with stock rom v19 20161124 and I need install the superuseryou cantell me which tutorial I should follow please, thank you