2014-03-26, 01:34
2014-03-26, 01:34
2014-03-26, 02:01
Want to try a port from Lenovo Kitkat to this baseROM but when i want to install it it gaves me error in CWM, status 7, shame.
2014-03-26, 02:57
(2014-03-26, 02:01)Quad Wrote: [ -> ]Want to try a port from Lenovo Kitkat to this baseROM but when i want to install it it gaves me error in CWM, status 7, shame.
Keep trying!! :-)
I am reinstalling LEWA Rom.
I want/need my GPS.
I get lost in my own street.
Will be back to stock when no one complaints about GPS.
2014-03-26, 03:03
(2014-03-26, 01:34)angelosath Wrote: [ -> ]Yes, U can update to 1.0.8...... U have to(2014-03-25, 17:50)noman1 Wrote: [ -> ](2014-03-25, 17:14)angelosath Wrote: [ -> ]Just received my v3 with rom inew_v3e_v1.0.1...What version, 850 or 900 WCDMA ?
Can i flash 1.0.8, or is this αn update for older devices?
wcdma850 v4.0
2014-03-26, 04:25
(2014-03-26, 02:57)MarcelMG Wrote: [ -> ]I did, but after several tries for ports, making my own CWM flashable zip from the flashtools and getting insane of the errors (error 0 / error 6 / error 7 etc) i think our phone is not really easy to create ports for or something.(2014-03-26, 02:01)Quad Wrote: [ -> ]Want to try a port from Lenovo Kitkat to this baseROM but when i want to install it it gaves me error in CWM, status 7, shame.
Keep trying!! :-)
I am reinstalling LEWA Rom.
I want/need my GPS.
I get lost in my own street.
Will be back to stock when no one complaints about GPS.
2014-03-31, 01:00
(2014-03-25, 01:40)bbq88 Wrote: [ -> ]Finished flashing with update.zip using stock recovery. Everything works fine.can you link me to the update.zip you used? thanks
Model number: V3
Build number: cxq_v3_inew-v1.0.8 (check by *983*32#)
Internal serial: CHUANGXINQI-EN-INEW-QB15AFD-S539-6582V1.0.0B09 (check by *789*1#)
Camera spec: same as 1.0.7
Seems again one big partition: Phone storage 13.49GB, available 13.09GB
2014-03-31, 18:59
Today I received my iNew V3. I don't know if I should upgrade version or let it as it is, some info:
Model number: V3-E
Build number: cxq_v3_inew_v1.0.6
WCDMA 850 v4.0
So, I ask to you experts, should I update to v1.0.8?
Model number: V3-E
Build number: cxq_v3_inew_v1.0.6
WCDMA 850 v4.0
So, I ask to you experts, should I update to v1.0.8?
2014-04-01, 01:19
(2014-03-31, 18:59)nxss Wrote: [ -> ]Today I received my iNew V3. I don't know if I should upgrade version or let it as it is, some info:
Model number: V3-E
Build number: cxq_v3_inew_v1.0.6
WCDMA 850 v4.0
So, I ask to you experts, should I update to v1.0.8?
Leave it alone if it's working fine. Which it should be since the ROM has been good since 1.0.3.
2014-04-01, 19:25
(2014-04-01, 01:19)Sniper47 Wrote: [ -> ](2014-03-31, 18:59)nxss Wrote: [ -> ]Today I received my iNew V3. I don't know if I should upgrade version or let it as it is, some info:
Model number: V3-E
Build number: cxq_v3_inew_v1.0.6
WCDMA 850 v4.0
So, I ask to you experts, should I update to v1.0.8?
Leave it alone if it's working fine. Which it should be since the ROM has been good since 1.0.3.
I finaly did upgrade to 1.0.8 and phone seems to work fine, expcept battery, it drops % by seconds when I turn on the screen.. about 1% each minute just turning on the screen from 100% to 50%, then it slow a bit. It's realy weird..
2014-04-02, 12:48
Hello all!
Are your OTG function working on 1.0.8? I try to connect flash disk and it don't see it. When I connect USB mouse it blinks for a while and then turns off.
P.S OTG-cabel 100% working (Check on other phones).
UPD: all is working now. need to restart phone.
Are your OTG function working on 1.0.8? I try to connect flash disk and it don't see it. When I connect USB mouse it blinks for a while and then turns off.
P.S OTG-cabel 100% working (Check on other phones).
UPD: all is working now. need to restart phone.