www.chinaphonearena.com

do it again, but this time choose the patch boot.img file that u just created.

(2013-10-24, 21:37)stevenma61 Wrote: [ -> ]do it again, but this time choose the patch boot.img file that u just created.

Same as above
[attachment=365]

thanks.

not too sure now.

if i can figure out , i will post it here again. at the mean time, wishing somebody else can help.

(2013-10-24, 22:34)stevenma61 Wrote: [ -> ]thanks.

not too sure now.

if i can figure out , i will post it here again. at the mean time, wishing somebody else can help.

Thank you Steven for your help. I appreciate it. I wonder if I'm the only one to get that error ... or maybe it's MTK Droid Tools that requires some sort of update. Maybe my device is somehow different? And - quite frankly - at this point I don't want to take any chances to brick it. Flashing the recovery is a very risky action. And from what I can see, we are on unknown territory here. If I lose the boot it's game over.

Mike

(2013-04-21, 00:30)yulypis Wrote: [ -> ]The procedure in short is:
A. Read the ROM
B. Process the ROM and generate the recovery (should be automatic)
C. Flash the generated recovery

In a bit more details:
A. Read the ROM which includes these sub steps:
1. Create a scatter file for your phone with MTKDroidTools and leave MTKDroidTools open
2. Open SP Flash Tools and load the scatter file you just created
3. Go to ReadBack Tab and Add a new entry - name it as you wish but leave the ROM_0 prefix - double tap the new entry and choose the length of ROM you want to read - to create the recovery it is enough to put the number of the partition right after the recovery (you can take that number from the scatter file you created) - Keep in mind the number must be in Hex - so when you copy it from the scatter file - make sure it's with the 0x prefix - something like 0x03d80000 for example.
4. Hit the Readback and disconnect your phone from the computer, shut it down, pull out the battery for a few seconds and then put the battery back - don't turn the phone on - just connect it to the usb - it should start the readback and eventually should finish with a green circle - if everything went good

B. Process the ROM and generate the recovery (should be automatic):
1. Go back to your MTKDroidTools - which should still be open from before - and hit "Process ROM" and choose the one you just read from the SP Flash Tools.
2. If the reading was successful - you should see the partitions you read being copied - and you would be asked if to create CWM recovery automatically - answer YES
3. After this process has ended successfully - go into the backups folder inside the mtkdroidtools folder - and you should see the ROM partitions you read - including the original boot.img and recovery.img as well as the newly created patched_recovery.img and patched_boot.img

C. Flash the generated recovery:
1. Create a new folder and copy your original scatter file you created in step A1 and your patched_recovery.img into this new folder.
2. In the new folder you created, rename the patched_recovery.img to just recovery.img
3. Open SP Flash Tools, choose the scatter file you copied in the new folder and you should see that it also adds automatically the recovery (make sure it's the correct folder) - Make sure that ONLY recovery section is selected !!!!!!
- hit Download and disconnect your phone from the computer, shut it down, pull out the battery for a few seconds and then put the battery back - don't turn the phone on - just connect it to the usb - it should start the flashing of the recovery and upon successful flash - you will see the green circle ;)

As always, I did it on my own device and it worked - but I can't guarantee for any others - so use this method at your own risk !!!

Thanks for the description

Patched_recovery.img with me does not create file

how about tutorial for qualcomm device like mqm 8225/8625, i had several time porting with cm 10.1 but still black screen on the cwm mode

Hello Sir
I am using a MTK Device.
during readback process it stops at
Checking uboot.bin ........ signature not found
what could be the possibility

Thanks for the detail explanation, I want to try this as a first step to fix my google play services failure....
I've already got SP flash tools elsewhere, where can I download MTKDroidtools?
How do I create that scatter file?
Can someone help to share the first few beginning steps in details?
Sorry noob here....
=(

im also having the same issue with mtkdroid...
everytime i flash the recovery it says attention recovery doesnt suit this phone.
i am using mtk 6572 gt-i9500

Hi, I'm stuck in the first passage, MTK droid tools doesn't recognize my phone! Here's the screen:
[Only registered and activated users can see links Click here to register]
So, my phone is a fake s4, GT i9500, MTK6589, I don't know if it helps but here's a photo from the shop: [Only registered and activated users can see links Click here to register]
It has Android 4.2.2 ..
I had a lot of troubles trying to root it, because a lot of programs which you listed didn't work; eventually, [Only registered and activated users can see links Click here to register] succeeded. I installed PdaNet on the phone and on the computer and the phone is recognized by it on the pc.
Finally, I put on the phone SuperSU (and I also have Kinguser after rooting). The root checker says it's correctly rooted. So...what's the problem? :'' My phone is correctly in debug mode.