www.chinaphonearena.com

Sorry for my bad translation.
I meant : be possible to flashing from Carliv touch Recovery v2.4 ?, It would be great..


I have backup fact, MTK Droid Tools v2.5.3, I put my backup in Micro SD
I need to get flash from Carliv Recovery Tool v2.4, flash my backup from the Recovery. How Could I do?.

Thank you both for their willingness friends are a big help for me.

Add: the backup of "Carliv Touch Recovery" downloaded one needrom, called Lewa-1.1-S4-mtk6572, placed it on my SD card, and I tried to flash in my recovery, began to flash for 1 minute, happy! !, but I went wrong, reaches a point that goes wrong, if I had or could convert my backup "mtk tools droid" convert format
"Carliv Touch Recovery", imagine it could make the flash .. I do not know as it becomes..

AT LEAST good news, my phone started .zip file That the installation process, from the SD Card, but hey, it was for phones mtk6572, and mine is mtk6589, or at least give me that information CPU-Z, help me think?

I am studying this guide: [Only registered and activated users can see links Click here to register]
They help me adapt my backup Files_to_FlashTool ?
I have no idea how to do, how to configure the "scatter" file, to make the flash from my recovery.
Please my friends.

another weird thing: my phone.info is:
Hardware : MT6589
Model : GT-I9500
Build number : ALPS.JB7.MP.V1.14
Build date UTC : 20140919-015117
Android v : 4.4.4
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V38, 2014/05/22 12:01
Kernel v : 3.4.39 (whl@server7) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Fri Sep 19 09:49:09 CST 2014
Uboot build v : ----- debe ser root shell
LCD Driver IC : 1-ili9806e_IVO_fwvga

This information gave me MTK Droid tool, I mean my Hardware is: MT6589. BUT !
With The Tools Droid MTK same program, I choose " Create scatter from firmware "
the scatter generating says:

MTK_PLATFORM_CFG
info:
- config_version: V1.1.1
platform: MT6572
project: MTDTtest
storage: NAND
boot_channel: NONE
block_size: 0x20000

¿ Then my phone MT6589 or MT6572 ? :S!.

Backup my ROM, before I die:
[Only registered and activated users can see links Click here to register]
someone could do me the favor to set up and become .zip file?, and so I can make the flash ?

I am eternally grateful

GabrielT Wrote:...
This information gave me MTK Droid tool, I mean my Hardware is: MT6589. BUT !
With The Tools Droid MTK same program, I choose " Create scatter from firmware "
the scatter generating says:

MTK_PLATFORM_CFG
info:
- config_version: V1.1.1
platform: MT6572
project: MTDTtest
storage: NAND
boot_channel: NONE
block_size: 0x20000
...

The hardware platform in the scatter file only relates to the platform at which the communication chip of your phone works, it does not have to be the same as your phone's cpu.
I just rooted a tablet with a 6582 and it has the same platform as your scatterfile.

btw. where did you get your scatter file? Did you make it with droidtools, or did you get it from a rom somewhere?

yes dude, Did you make it with droidtools, ah ok I understand, then fine, I need ROM "MT6589" only truth?

---

that's my copy of full security, made with mtk tool droid..
you could adapt it to flash from my Recovery Magic?
I do not know how to configure the scatter, I have no idea,
That would revive my phone
please ^^

I installed the drivers correctly, and tools made flash memory read everything very well. so I took advantage and load my backup scatter, the flash was all good, appeared green symbol. I went to turn on my phone normally, and no lights .... I removed the battery 1 minute, put it back, and no lights ..

Well, try to flash my backup, or another rom, but now disappeared "MediaTek preloader USB VCOM" both work gave me .. Now MTK USB PORT following appears:
[Only registered and activated users can see links Click here to register]


and if I want to replace the driver, you leave me, just let me choose it. what's happened? I make? : S

[Only registered and activated users can see links Click here to register]

try with all list

After going-through hell with the damn driver MTK65xx, I finally managed to make the flash, and what happened? .. I flash the Preloader wrong, now the phone does not walk or to back, no lights, no nothing .. The pc Detects it as "MTK USB Port" impossible to reinstall the driver Who Had .. Phone dead message:
BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
I have done Mtk droid backup tools .. can revive?

Remember my post #10 ?

MirandaM Wrote:...
If your're still able to get into recovery on your phone, you should not flash the preloader in flashtools. That is only needed if your phone does not boot at all.
...

Well I guess you didn't read that, too bad because now you have another problem that could have been avoided.
Anyway, your droidtools backup has a preloader backup so you should concentrate on getting that one flashed to your phone.

What you need to do is flash the following:
[attachment=2104]
Be sure to tick / untick the parts exactly as shown in the image.

Only those are needed the get your phone working again. You need to use the same method for flashing. Don't change any drivers, they seem to work so don't touch them. Don't worry about your phone being dead, flashtools will still be able to flash.

From my 40+ years of experience I can give you this advice:
IF SOMETHING WORKS DON'T TOUCH IT.
(¡Cuando algo funciona, no se toca!)

Meaning, your recovery was functioning, so you don't touch it, nor anything else until your preloader is functioning again.

After flashing you should start your phone in recovery, no normal boot as it won't work just yet. When you get to the recovery menu, don't do anything more. Just shut down the phone and leave a message here to proceed with the next step.
You still have an error in your flashtools setup which I will tell you later, at this moment it will not affect anything.

After the memory test my phone died, not light, or recovery .. I think I killed him .. I have backup tools mtk droid .. have salvation?

BROM ERROR: S_FT_ENABLE_DRAM_FAIL (4032)
Hi, I did not know what to + Rep hehe, abide by the rule thanks =)
thanks for replying. nobody helped me for the moment..



Does not allow me to install "USB VCOM MediaTek preloader"
I tried all All MTK With all Ultimate Driver.
1) as I read it, the phone is in a state of Brick
2) The solution would flash the firmware, but my phone is new on the market, and Their ROM in internet does not exist.

This is my backup:


Please can you help me?.

in the bucket I have to find a new preloader.bin, that model look ?, because I'm dizzy, my Board is: mtk6589_e_lca. But people who actually is MTK6572 says .. you crazy all this

Don't go about searching for another preloader. You have your preloader.bin right under your nose, in your backup.

Now listen and read this very carefully, I'm telling you this because you are a newbie and I can only help you or try to do so if you are willing to stick to what I tell you. If you are going to flash other preloaders and different stuff you will be getting into more trouble which you are not able to handle.

(here's the translation of the above so you will understand it:
Por favor, presta attención a lo que digo, no te lo digo en plan soberbia sino más por tu propio bien. Como principiante, sólo te puedo ayudar si sigues mis instrucciones, si vas a hacer lios con otros preloader y más cosas, te vas a meter en un follon que no veas y que no sepas solucionar. ¿ok? p.d. si necesitas alguna aclaración dimelo y te lo pongo en español, más vale entender antes de hacer las cosas mal)

First of all things:

You make a backup of your current droidtools backup in another folder. After doing so, you NEVER, NEVER touch that new backup folder again.

Now you need to clean up the scatter files in your droidtools backup folder. Currently you have three scatter files there, which is the one you use? This should be the original scatter that was created by droidtools during your backup.
Looking at the image I would say this is the one:
[attachment=2107]
Tell me if that is the right one, and if it is, then move the other ones to another folder somewhere else to avoid confusion.

When you have done that please attach the scatter file in your reply so I can have a look at it. And please, use the forum attachment, no 4shared as I don't have an account there I won't be able to look at it.

Hola amigo, me alegro que sepas Español, yo soy de Argentina, y te agradezco mucho por la ayuda que me brindas, tienes razon yo no debi meterme en un terreno desconocido, pero bueno, lo asumo.. Por cierto no creo que tu seas arrogante como me decias jeje, haces bien en querer ayudarme.. Bueno mi amigo, mira la cosa es asi, cuando yo hice el backup con el Mtk Droid tools, mi telefono funcionaba perfecto, el problema del backup fue que cuando comenzó a trabajar, el archivo Preloader.bin marcó error, igual lo puso en la carpeta !Files_to_FlashTool!. Ese backup que subi y que te mostraba en imagenes, es el backup que tengo si, ya elimine los 2 Scatter que yo habia hecho, en la desesperacion, aqui te subo el archivo vale, en verdad te agradezco por tu ayuda, no le tocare nada al celular, creo que ya bastante la jodi :/ .. te hare caso, a lo que tu me digas si. No se como adjuntar cosas al foro, pero mira te copio el scatter completo.


PRELOADER 0x0
{
}
__NODL_PRO_INFO 0x80000
{
}
__NODL_NVRAM 0x180000
{
}
__NODL_PROTECT_F 0x300000
{
}
__NODL_SECCFG 0x480000
{
}
UBOOT 0x4a0000
{
}
BOOTIMG 0x520000
{
}
RECOVERY 0xb20000
{
}
SEC_RO 0x1120000
{
}
__NODL_MISC 0x1160000
{
}
LOGO 0x11c0000
{
}
__NODL_EXPDB 0x12c0000
{
}
__NODL_FAT 0x14c0000
{
}
ANDROID 0x28c0000
{
}
CACHE 0x14cc0000
{
}
USRDATA 0x14e40000
{
}
__NODL_BMTPOOL 0xffff0050
{
}