www.chinaphonearena.com

(2018-01-07, 00:25)Cleopatra Wrote: [Only registered and activated users can see links Click here to register]



Regards

I flash this version 4 times. But there dont work the compass too.
I have install the digital compass. In the version 2017-05-24 the sensors are there, but dont work. in the after version the sensors are not there.
This is not so good XD.
Now i have flash the original rom and updated to 2017-08-29 in the hope the sensores and compass work... but no.

This is the reason for the question about a flashable zip with this data etc. ;)

I flashes it back to version 2017-05-24

The Sensors are there but dont work. I look at the app Sensor Box.

Vernee Thor E - TWRP 3.2.0





WARNING :

Make sure you have installed the next stock rom :

ro.build.display.id=Thor_E_20170829183629
ro.build.version.incremental=1504003280




SuperSU and Busybox

a) Download SuperSU.zip and BusyBox.zip at the next link :

[Only registered and activated users can see links Click here to register]

b) Unrar the rar
c) Copy SuperSU.zip and BusyBox.zip
d) Paste SuperSU.zip and BusyBox.zip onto microSD


SP Flash Tool 5.1744.00.000

Download at the next link :

[Only registered and activated users can see links Click here to register]


TWRP 3.2.0 at the next link :

[Only registered and activated users can see links Click here to register]




TWRP STEPS :



1) Tap on Settings --> About phone --> Tap Build number seven times.

Developer options --> USB debugging enabled.

2) Turn off the phone.
3) Open SP Flash Tool.
4) Unrar the TWRP rar.
5) Load the scatter file inside the twrp folder.
6) Select Download Only option.
7) Click Download.
8) Connect your turned off phone to the pc with USB cable.
9) When 100% disconnect the USB cable.
10) Enter onto twrp recovery (volume up + power buttons simultaneously).
11) Swipe to allow modifications.
12) Change the Cyrillic language onto your language.

FUNDAMENTAL

13) Tap on WIPE
14) Tap on FORMAT DATA
15) Type YES and then tap the check mark
Please see the next screenshots :



VITAL

16) Tap Install, Select Storage, Micro SDCard, OK.
17) Tap on SR1-SuperSU-v2.82-SR1-20170608224931.zip

18) Swipe to confirm Flash.
19) Tap on Reboot.
20) TAP ON DO NOT INSTALL (the next screenshot) :



Keep in mind that you have just formatted the data,
then you have to reinsert your informations (the setup wizard).

21) Tap on the icon of SuperSU to activate it.
22) I strongly recommend you to install the next apk (root required) :

[Only registered and activated users can see links Click here to register]

This apk is useful to avoid to press volume + power buttons to enter onto twrp.


JUST OUT OF CURIOSITY

I noticed one small difference between the previous twrp and this 3.2 version.
Onto twrp 3.1 there are MD5 files
Instead, onto this twrp 3.2 there are SHA2 files
Take a look to the next screenshots :





However, this difference does NOT compromise the functioning of twrp 3.2
I have made a full backup and I have restored it without any problems.
Take a look to the next screenshots :

If I ve already have TWRP can't I just update it? Download the image file and install it from inside TWRP? Or from inside an app like TWRP or flashify?

(2018-01-18, 13:45)achkap Wrote: [ -> ]If I ve already have TWRP can't I just update it? Download the image file and install it from inside TWRP? Or from inside an app like TWRP or flashify?

You asked to me an intelligent question.

You have to flash the new twrp 3.2.0 via SP Flash Tool.
Just to be safe, re-install SuperSU zip before to reboot in normal mode.


The most important thing :

You will have to make a new full backup onto your microSD.
The old full backup made by the twrp 3.1 is no good.

It is because there is a difference between the 3.1 backup and the 3.2 backup.

As I pointed out, the twrp 3.1 use the MD5 files :



Instead, the twrp 3.2 use the SHA2 files :




Regards 

(2018-01-18, 17:19)Cleopatra Wrote: [ -> ]You asked to me an intelligent question.

You have to flash the new twrp 3.2.0 via SP Flash Tool.
Just to be safe, re-install SuperSU zip before to reboot in normal mode.


The most important thing :

You will have to make a new full backup onto your microSD.
The old full backup made by the twrp 3.1 is no good.

It is because there is a difference between the 3.1 backup and the 3.2 backup.

As I pointed out, the twrp 3.1 use the MD5 files :



Instead, the twrp 3.2 use the SHA2 files :




Regards 

I wonder why. Spflash tool and flashify do the exact same thing. Install the img file..
And a question. Do you or somebody else think to port lineage os or any other custom rom or we are stuck with stock?
Thank you for your answer

Yesterday I've updated to TWRP 3.2.0 without any issues. I have already had rooted the latest available rom (20170829) and TWRP 3.1.0. I just flashed the new 3.2.0
 with flashtools and everything is working fine. No need to wipe data. Also the TWRP settings were kept from the previous version.

Thanks, Cleopatra!

(2018-01-22, 15:06)marsa Wrote: [ -> ]Yesterday I've updated to TWRP 3.2.0 without any issues. I have already had rooted the latest available rom (20170829) and TWRP 3.1.0. I just flashed the new 3.2.0
 with flashtools and everything is working fine. No need to wipe data. Also the TWRP settings were kept from the previous version.

Thanks, Cleopatra!

You mean sp flashtool from PC or directly from the phone?

(2018-01-23, 15:35)achkap Wrote: [ -> ]You mean sp flashtool from PC or directly from the phone?

SP Flash Tool method.

Can I flash Magisk instead of SuperSu for root?? Will it boot-up?