(2014-03-19, 04:15)vazarg Wrote: [ -> ]Hello,
I have a big problem with my touchscreen with V1.07 that is no calibrated.
I have flash with V1.01 and V1.03 and V1.05 and always the same problem.
How make for calibrate in the factory menu because it's chiness.
PS : excuse me for the language i'm french
Your English is very good.
There was an old method (around 2011) that forced android to calibrate the touch screen on boot. I can't verify whether this will work with your phone (or modern versions of Android), but it can't hurt to try.
1. Create a blank text file called "calibration.ini" and put it at the root directory on your phone and SD Card.
2. Reboot the phone.
3. This should force it to enter a touchscreen calibration mode. After you have calibrated, you can delete the file.
Again, this is an old method. I can't guarantee it will work, but perhaps it's worth a shot.
Another Google search suggested that recalibrating the motion sensor / gyroscope would help solve this problem. To do this:
1. Go to "Settings"
2. Select "Display"
3. Select "G-Sensor Calibration"
Hope one of these methods is helpful. Good luck!
Fash lewa version and its fixed then you can flash other
(2014-03-19, 04:15)vazarg Wrote: [ -> ]Hello,
I have a big problem with my touchscreen with V1.07 that is no calibrated.
I have flash with V1.01 and V1.03 and V1.05 and always the same problem.
How make for calibrate in the factory menu because it's chiness.
PS : excuse me for the language i'm french
No arioch
I new v3 is a conquistador... Its at the front.. Takes all the wounds alone.
(2014-03-19, 04:36)danyno1 Wrote: [Only registered and activated users can see links Click here to register]
Dram errors usually happen when you flash a wrong preloader or or a wrong ROM that doesn't fit your phone.
Here you go ,use 1.0.5 ROM files with this method and probably your phone will be alright
How does it help me? I only find that I have a bricked phone, but that I already knew :/
Can you be more specific or my phone has gone forever?
(2014-03-19, 04:27)WuddaWaste Wrote: [ -> ] (2014-03-19, 04:22)abi13 Wrote: [ -> ]Hello to all.
Sorry, but i am new here.
Can you help me ? I have done the frimeware1.07
and it has made the touch inverted
i have version v4
The first post in this thread recommends flashing with v 1.0.5 if you're having problems with 1.0.7. I'm going to echo that post and recommend you try firmware 1.0.5.
thank you
now it works and i have version 1.0.5
how can i do to make the version 1.0.7
without having that prb
Thank you All
(2014-03-19, 04:40)cmachado0 Wrote: [ -> ]Fash lewa version and its fixed then you can flash other
(2014-03-19, 04:15)vazarg Wrote: [ -> ]Hello,
I have a big problem with my touchscreen with V1.07 that is no calibrated.
I have flash with V1.01 and V1.03 and V1.05 and always the same problem.
How make for calibrate in the factory menu because it's chiness.
PS : excuse me for the language i'm french
thank you it's the solution.
thank you for help me.
i have a V3.0 with 850/2100
With 1.0.7 i have the touch screen calibration issue and did not find any solution yet.
As for now i flashed 1.0.5. My touchscreen is ok again, but obviously it would be much more exciting to use 107 so please find a solution!
Anyone have some help for me?
i have the inew V3 with 850/2100 and the same problem with touchscreen
Mine is fine now, and with working touchscreen