(2014-03-18, 19:58)yamontv Wrote: [ -> ]On the russian forum (another forum) everyone who flashed 1.0.7 have touchscreen problems. Please tell version of the phone (under battery) those who have no problems with touch after updating and otherwise those who have problems. I think this firmware is version specific.
mine is inew v3 verson 4 (v4) , I dont have touch problems, but for me 2g simcards doesn't work
and your inew v3 version?
(2014-03-18, 19:32)arioch Wrote: [ -> ]Did you check band mode with mobile uncle? Everything is enabled?
how should i do that?
I just checked in the model forum- engineer mode (android) -- phone information:
top lines are like this:
IMEI: unknown
phone number:
Current netwoek : RighTel (mt 3g operator name)
a little below there , there is this:
GSM service: Enabled
A little beloew there there is this option;
Set preferred network type : it was pre set to "wcdma only"
I tried to change it to gsm/cdma , or other gsm related options , they didnt work
now I set it on gsm only.
and both 3g and 2g simcards are offline now
(2014-03-18, 20:05)danyno1 Wrote: [ -> ]and your inew v3 version?
Mine is v4 but I still not flashed it. I'm gathering information to decide if I need it
(2014-03-18, 20:05)danyno1 Wrote: [ -> ]IMEI: unknown
I think this is the main problem. Restore IMEI first.
Strange, I also have v4 and I have touchscreen issues after flashing 1.0.7.
Reverting back to 1.0.5 solved the problem, but reverting to 1.0.4/1.0.3 didn't.
(2014-03-18, 20:26)yamontv Wrote: [ -> ] (2014-03-18, 20:05)danyno1 Wrote: [ -> ]and your inew v3 version?
Mine is v4 but I still not flashed it. I'm gathering information to decide if I need it
(2014-03-18, 20:05)danyno1 Wrote: [ -> ]IMEI: unknown
I think this is the main problem. Restore IMEI first.
how??
with mobile uncle tools , it says: NO SUPPORT
I'll try with mtk droid. Tools later
(2014-03-18, 20:28)Eliwood Wrote: [ -> ]Strange, I also have v4 and I have touchscreen issues after flashing 1.0.7.
Reverting back to 1.0.5 solved the problem, but reverting to 1.0.4/1.0.3 didn't.
from which rom did you upgraded to 1.0.7??
I had Ultimate 1.0.3 , with that partition mod , that almost killed my phone
maybe my phone is tough
it has survived from a brick, it won't let a stupid rom , paralyze it ;P jk
There are 4 things to try.
Check engineering mode see if they're available to checking
Write imei with MTK tool
Restore your nvram backup. You do have your nvram backup, yes. : )
Reflash 1.0.7, but remove baseband file first and copy all 3 baseband file from 1.01 original. Use firmware up mode. Not the download.
(2014-03-18, 20:36)danyno1 Wrote: [ -> ] (2014-03-18, 20:26)yamontv Wrote: [ -> ]I think this is the main problem. Restore IMEI first.
how??
with mobile uncle tools , it says: NO SUPPORT
There is fast way without restoring nvram.
1. Enter in engineer menu - code *#*#3646633#*#*
2. Choose: "Connectivity"/"CDS Information"/"Radio Information"/"Phone1" (or "Phone2" for sim1 or sim2).
3 for sim1. In the field "AT+" write after all "EGMR=1,7,"your IMEI1"".
Result: "AT+EGMR=1,7,"your_imei1"". Press "SEND AT COMMAND".
3 for sim2. In the field "AT+" write after all "EGMR=1,10,"your_imei2"".
Result: "AT+EGMR=1,10,"your_imei2"". Press "SEND AT COMMAND".
5. Exit from engineer menu and restart phone.
6. Check IMEI - code *#06#.
But if you broke nvram, everytime after reflashing you loose your IMEI and you need to do this operation again.
That is not restore nvram. That is write imei. They are related but different.
Thanks.
Will you please explain a little bit that where exactly I keep my nvram backups?
Danyno1 go to engineer mode mtk, band mode and check everything!
Got it. Thx people
OK now I have both simcards activated.
The only problem left is not having clockworkMod